How to Recover Files from an External Hard Drive using a Free Deleted Recovery Software?

Do you want to recover files from an old External Hard Drive? Don’t worry; you have come to the right place. Following, we are going to give you a brief guide that will explain how you can do it.

Recover Files from a Dead External Drive

Following, we are going to share the actional steps to recover data from a broken or dead external drive.

  • First, get a free deleted recovery software and install it on your local drive. Once the installation is complete, you need to connect your external hard drive to the computer and run software to see the main interface.
  • Check if the partition containing your files exists or not. Afterward, find a suitable option from the main interface of the external hard drive recovery software.
  • Boot up the software and select the drive from which you want to recover files from. You need to check the existing partitions on your external hard drive. In case you can’t create the partitions, you can select the whole drive and proceed ahead.

A Word of Advice:

If your device isn’t detected in software, you will need to unplug the external hard drive and connect it again to the computer. Just wait for the recovery software to refresh list. If this doesn’t work, then scan the hard drive once again.

  • Now go through the found data and pick the files you would like to recover. Set the storage path and commence recovery.
  • It’s possible the external hard drive might be dead or get further damaged during the recovery process So; you need to take extra precaution to assure you salvage your data. If you hear a clicking sound from your hard drive, then try to rescue your data.
Also Read:   Recovering Data From A Corrupted Hard Disk

Can’t Find the External Hard Drive in Computer

Don’t be afraid if you are unable to find your external hard drive once you connect it to the computer. Yes, you might think the drive is dead, but don’t make any stupid decision during this panic. Following, we are going to discuss a few solutions to this issue.

Causes with their Solution

Driver Issue

The reason why the external hard drive is not showing up is that you have out of date or obsolete drivers. To affirm this is the issue, you must take the following steps:

  • Boot in safe mode when starting your device and exit it by restart the system. This might help you repair the registries.
  • If the problem persists, you need to use the Windows in-built restore function; it will restore your system to a last known configuration. It might help your case.
  • If this doesn’t resolve your issue, then you need to adapt to the system repair disc. Open a command prompt and type SFC/SCANNOW and hit Enter. Now wait for the process to finish.
  • By chance the issue doesn’t resolve by now, you need to enter BIOS and change boot device priorities. Once done, restart your system and initiate a full-system repair.

CMOS

You might need to change the CMOS parameter settings on your computer. If you didn’t use USB External Hard Drive before, then your system won’t detect it even if the drivers are properly installed.

Also Read:   Review of iBeesoft Data Recovery Software and Flat 40% OFF Code

Improper CMOS are common when your motherboards CMOS default port is closed. You can easily fix it with the following steps:

  • Reboot
  • Enter CMOS Settings Window
  • Set “Assign IRQ for USB” as “Enabled” in “PNP/PCI Configuration.”

This will probably resolve the Issue.

Power Shortage

Your power supply can also be a reason why your system is not able to detect the external hard drive. If the power supply isn’t providing adequate power, it won’t power up the external hard drive. Therefore, you need to find an alternative power source for the external hard drive to work.

USB Data Line

Its possible your USB Data Line has some issues. If the USB Data line is broken, there is no way it can access the computer. Besides, if your standard USB interface is different from the one on External Hard Drive Interface, then also your device won’t be recognized.

If the failed data line is causing this issue, then you need to replace it with a new one.

Drive Letter Issue

This is a bit mysterious reason. It suggests the driver letter which belongs to your external hard drive is taken by one of your computer’s local drive. Use disk management or a third-party application like Data Recovery Software Free Download for Windows 7 to change the letter of your External Hard Drive.

Summary

You can easily recover data from an external hard drive. Just make sure your computer reads it,and the device doesn’t have any other fault than we discussed. If you want to save yourself from a world of pain, you better use the prescribed recovery tool. If you don’t, you will have a long time recovering your files from the External HD.

Further Reading...

Published by Nishitha

I am done with my Physiotherapy Graduation. And I always try to share Health and technology tips with people. Apart from Physiotherapy and being a tech savvy, I do explore more on Technology side and I keep sharing my findings with wider audience.

Leave a comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Send this to a friend